Sing Log Homes - Easy to Build Home Design
Welcome! For additional information on our other products please visit our Partner Sites
Lightweight News
Super HoneyComb
Tiny House Lightweight Furniture Lightweight Doors
Click Here for more on our patented Sing Core
Sings Club
Name *
Email *

Please enter the code above in the box below
- Upcoming Events
- Special Promotions
- Club Discounts
JOIN TODAY!

Visit our Partner Sites...



Sing Log Home - Unique Designs
Sing Log Home - Unique Designs
Do-It-Yourself Log Cabin Kits
Log Home Log Building Kits
Do-It-Yourself Log Cabin Kits
Pre-fabricated Square Log  Homes
Do-It-Yourself Log Cabin Kits
Pre-fabricated Log  Homes - Do It Yourself Designs
Sing Square Logs - Easy to Build

Of interest: Check out Pioneer Homes Photo Page

Step 6: Finishing

Electrical Outlets...

The easiest way to go is to use the remote system for your outlets they are inexpensive and require no wiring. Another option is to run your wiring along the floor and up the corners and cover with molding.

Outlets for lighting and electrical connections are relatively simple. Pick the log which will contain the outlet before installing it, and using your circular saw (or reciprocating saw) cut out the outlet from the interior wall half of the log, starting from the top. This is more easily done if your outlets are placed horizontally. Wiring should be prepared beforehand, so you can simply pull it through the hole to connect to the socket or fixture later.

Since the logs are staggered, there should be continuous space to weave the wiring inside the hollow space. You may also "fish through" after the wall is completed, use conduit, or have all outlets in the floor and ceiling.

Sing Log Home - How to build Sing Log Home - How to build
Corners...

Use a router or chisel to remove the tongues from the section of log which will become part of a corner. Exterior corners should be foamed in with spray insulation (common types like "Big Stuff" or "Dap" are readily available from your local hardware store) and covered with 1" cedar trim up the entire vertical lengths of both sides. Use sufficient caulking around the seam between the logs and the trim, as well as where the trim boards meet to ensure a perfectly tight seal.
Sing Log Home - How to build Sing Log Home - How to build


Stains...

Once your walls are erected, and before windows and doors are installed, you should apply a stain to the outside facings. A porous, at least slightly tinted stain is recommended to prevent moisture and UV damage. It should preferably be designed specifically for log homes. We recommend Sikkens® Cetol® exterior and interior finishes as they have been thoroughly tested and proven to be superior.

Caulking...

For any log to log, or wood to wood caulking requirements, we suggest using Sashco Logbuilder. It has proven very easy to apply, extremely flexible, and long lasting.

Adhesives...

Recommended adhesives include Franklin titebond solvent free construction adhesive, PL Premium, PL 400, and 3M 5230. We prefer the Franklin Titebond because it is water based and requires no protective gloves etc. during application, and very easy to use and clean up.

home | about us | FAQ | contact us