|
|
| Visit our Partner Sites...
  |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
|
 |
|
The Sing Advantage
The manufacturing of Sing Square Logs starts with quality Douglas fir, western red cedar, or pine taken either from small logs or pre-milled lumber. The lumber is then dried in Sing Home's kilns until the moisture content is stabilized at around 12%.
Our patented sawing technique is used to produce quarter-sawn, all vertical or straight grain wood strips from the lumber, with their internal stress relieved. The strips are then laminated with non-toxic glue to form one side of the Sing Square Log. Two laminated "'walls", with their wanes and imperfections turned inside, are then joined together with wood spacers and metal fasteners to form a single log assembly.
The quarter-sawn, vertical grain laminates give the Sing Square Log its remarkable dimensional stability -with virtually no shrinking, checking or splitting.
|
|
Plain Sawing vs. Quarter Sawing |
|
|
|
Easy Assembly
The Sing Square Log's thick double wall provides the thermal mass to absorb, store and slowly release heat over time. This means that it takes a long time for temperature outside a Sing Log Home to change the temperature inside. |
Building with Sing Square Logs
Building with Sing Square Log is simple and straightforward. The first layer of logs is anchored to the foundation with the supplied 1/2" thick steel plates.
Subsequent layers are stacked up by applying construction adhesive to the double T&G logs, then fastening them with the supplied Olylog® screws.
Two laminated "'walls", with their wanes and imperfections turned inside, are then joined together with wood spacers and metal fasteners to form a single log assembly.
|
 |
CONTACT A SALES REPRESENTATIVE TODAY! CALL - (360)495-3577 INFO@SINGHOME.COM |
|
|